More info
100Wc for motorhomes, caravans, boats...
Complete 100Wc solar kit for campervan with monocrystalline solar panel, cells guaranteed 20 years.
The panel and battery wiring is in 4mm2 double insulation so as to guarantee a charge without any losses.
Loading the battery in 3 steps ensures an extremely clean charge of the battery.
![Mounting system for solar panel on motorhome]()
Composition
Solar panel 12V 100Wc Monocristallin
The small size of this panel (54cm by 121cm) and its weight make it an ideal companion for nomadic applications (camping, boat...).
It is perfect for installation on the roof of a vehicle for example.
The frame is made of weather-resistant anodized aluminum. It provides the panel with a particularly strong mechanical stability to ensure ease of assembly and transport.
The connection is simple and fast (60cm of cable with MC4-like socket)
- Normal NOCT operating temperature: 45oC
- Wind resistance: ?130 km/h
- Maximum hailstone diameter: 25 mm
- Hail strike speed: 80 km/h
- Light and reinforced anodized aluminium frame
- High glass transmissiveness
- "plug-play" box with 2 diodes
- 4mm-thick secure glass
Characteristics
| Operating temperature | -40-85 degrees Celsius |
| Material | Anodized aluminium |
| Tolerance | 0-3% |
| Operating voltage (Vdc) | 1000 |
| Material | White Tedlar |
| Max protection by reverse overtensity | 15 A |
| Voltage | 12v |
| Weight | 8 kg |
| Color | Classic |
| Panel type | Rigid/traditional |
| Cells | Monocrystalline |
| Maximum Power - Wc | 100 |
| Open-circuit tension (Voc) | 22.08 V |
| Short-circuit current (Isc) | 6.03 A |
| Maximum Power Current (Imp) | 5.83 A |
| Max power voltage (Vmp) | 17.18 V |
| Width | 545 mm |
| Height | 1195 mm |
| Framework | 35 mm |
![Solar Controller MPPT 10A SRNE SRNE]()
Solar Controller MPPT 10A SRNE
The SRNE range of solar controllers offers an optimal MPPT tracking efficiency of 99.9% with a 15-20% higher load efficiency than a PWM
Characteristics
| Model | MT2410 |
| System voltage | 12V |
| Max input power of solar panel | 130W |
| Transfer efficiency | ≤ 96% |
| Rate charge/discharge current | 10A |
| Lo load loss | < 15mA |
| Max input voltage of solar panel | < 150V |
| MPPT tracing efficiency | > 99% |
| Over voltage protection | 16.5V |
| Limited charge voltage | 15.5V |
| Equalizing charge voltage | 15.2V |
| Equalizing charge intervam | 30 days |
| Boosting charge voltage | 14.4V |
| Floating charge voltage | 13.8V |
| Over-discharge recover voltage | 12.5V |
| Over discharge voltage | 11.0V |
| Boosting charge time | 2 hours |
| Equalizing charge time | 1 hour |
| Over temperature protection | Yes |
| Light-operated voltage (on) | 5V |
| Light-operated voltage (off) | 6V |
| Light operated delay time | 5 min |
| Working temperature | -35°C ~ +65°C |
| Weight | 430g |
| Altitude | ≤ 3000m |
Wiring
The kit is equipped with special 4mm2 double insulation solar cable. This important section ensures that it does not heat up even in case of heavy production, so we are sure to have optimal battery charges while minimizing losses to the maximum.
5 m of cable with mc4-like connectors set on the cable are intended to connect the panel to the load regulator. The 'linkpopup id'mc4' connectors ensure a perfectly watertight connection between the panel and the cable, and also make it easy to remove the panel.
2m battery cable with crimped battery pod are also provided.
Fasteners
The kit is delivered complete, the assembly is limited to the attachment of the panel on the vehicle as well as the passage of cable between the panel and the regulator
4 corners of fasteners to install a solar panel on the roof of a camper van,
The corners stick to the roof of the camper with the glue provided and the panel is screwed onto them.
The panels are raised a few centimetres, allowing good ventilation of these and minimizing losses due to high temperatures.
2-entry van roof pass
Waterproof cable pass to attach to the roof of a camper van or one to make the cables pass clean and watertight. With UV protection.
Ultra-strong glue
Specially designed for secure attachment of the fastening corners and the roofing sleight.
Option
More features with the MT50 display
Choosing the different modes of control of the 12/24V output:
Manuel ON/OFF,
Light ON / OFF,
ON Light - Timer,
Schedule alone
Selecting the type and capacity of the battery
Possible change to all load voltages
Real-time monitoring of the entire installation
4/5
5/5
