Phoenix – VE converter. Direct

Converters allow you to power home equipment — a 230V power source required — using "leisure" or "automotive" batteries with a voltage of 12V, 24V or 48V.

EV communication port. Direct

The VE port. Direct can be connected to :

• A computer (EV interface cable. Direct-USB required).
• Apple and Android smartphones, tablets, macbooks and other devices (a Bluetooth Smart electronic key communicating with VE. Direct is required).

Fully configurable:

• Reset levels and alarm triggering in case of low battery voltage
• Reboot levels and shutdown in case of low battery voltage
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 - 245 V
• Output frequency 50 Hz or 60 Hz
• ECO Mode Detection Level and ECO Mode On/Off

Monitoring :

• Input and output voltage, % charge and alarms

Proven reliability

The complete bridge topology with a toroidal transformer has proven its reliability for years.
The converters are protected against short circuits and overheating, whether in case of overload or high ambient temperature.

High starting power

Necessary to start loads such as power converters for LED bulbs, halogens or power tools.

Mode ECO

In ECO mode, the converter will switch to pause if the load drops below a predetermined value (minimum load: 15 W). Once paused, the converter will turn on for a short period of time (adjustable; default: every 2.5 seconds). If the load exceeds a preconfigured level, the converter will remain on.

On/off remotely.

A remote on/off switch can be connected to a two-pole connector or between the positive pole of the battery and the left contact of the two-pole connector.

Diagnostic LEDs

Please refer to the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For our low-power converters, we recommend using our Filax automatic transfer switch. The Filax benefits from a very fast transfer time (less than 20 milliseconds) so that computers and other electronic equipment can continue to operate without interruption.

VictronConnect

VictronConnect allows you to obtain live information about the status of your equipment and configure your Victron products using the built-in Bluetooth device or using a Bluetooth Smart dongle connected to EV. Direct.