View full size 
More info
Adoption of a double-crested or multi-crest tracing technique, used for the condition when part of the solar panel is under shadow or parts of the solar panel are damaged.
Built-in maximum power point tracking algorithm that promotes the energy efficiency of the pv system. The charging efficiency is 15%~20% higher than PWM mode.
It can find the best working point of the I-V curve in 1 minute. MPPT efficiency can reach 99.9%.
Adopts advanced digital power supply techniques that make energy conversion efficiency reach 97%.
Four charge levels: MPPT - equalization charge-boosting charge- floating load.
Current limiting charging mode: When the power of the solar panel is oversized, the controller automatically reduces the charging load, allowing the system to operate under the rated charge current.
Indicates fault codes during anomalies, this helps the user to confirm the system failure.
Different methods of load control. Automatic day-night cycle recognition.
Various system protection functions, including overcurrent, excessive discharge, overcharging, overheating, reverse battery connection and short circuit protection, etc.
Compatible with RM1 display
| Model | MT2410 |
| System voltage | 12V |
| Maximum input power of the solar panel | 130W |
| Transfer efficiency | ≤ 96% |
| Flow load / discharge current | 10A |
| Pressure drop | < 15mA |
| Maximum input voltage of the solar panel | < 150V |
| MPPT traceability efficiency | > 99% |
| Booster protection | 16.5V |
| Limited charging voltage | 15.5V |
| Equalize charging voltage | 15.2V |
| Equalize load intervam | 30 days |
| Increased charging voltage | 14.4V |
| Floating charging voltage | 13.8V |
| Excessive discharge recovery voltage | 12.5V |
| On the discharge voltage | 11.0V |
| Boost charging time | 2 hours |
| Equalization load time | 1 hour |
| Overheat protection | Yes |
| Light voltage (on) | 5V |
| Light voltage (off) | 6V |
| Functional delay time | 5 min |
| Operating temperature | -35°C ~ +65°C |
| Weight | 430g |
| Altitude | ≤ 3000m |
| Dimension | 143*71*37.4 (mm) |
| Installation dimension | 139*48 (mm) |
| Overload protection | Charging current≥1.25 times rated current, cut the charge within 10 seconds; Charging current≥1.5 times rated current, turn off charging within 5 seconds |
| Protections | 1 Reverse polarity. 2. Excessive indoor temperature. 3. The voltage of the PV input terminal is greater than the value. 4.Au loading 5. Reverse charge protection at night. 6. Protection against TVS rays 7. Waterproof: IP 64 |
- Number of Reviews : 3
- Average Grade : 4.3 /5
- A. Anonymous
- the 12/04/2021
4/5
- A. Anonymous
- the 10/05/2019
5/5
- A. Anonymous
- the 28/04/2018
- 4/5
Specifications
| 10A | |
| 12V / 24V | |
| MPPT |
