More info
All our kits are configurable. In the options you can click on the product to choose another model or change the quantities to suit the kit to your needs. You can also see the details of the selected products directly below the price.
This kit is sized with the general purpose of feeding a cabin or a small cottage.
The products described are subject to change depending on the availability of the products. (See composition of the kit)
What can I expect from my Lithium batteries?
In general, lithium batteries can be discharged much faster than lead stationary batteries. They also allow more of their capacity to be used. It is common to be able to unload them in an hour and to be able to use up to 90% of their capacity.
How do you know your battery capacity?
This is expressed in amps hours, it is the product of the multiplication of the capacity (Ah) of the battery by the voltage (V) of it:
Example : 4 100Ah 100Ah batteries mounted in series will give a voltage of 48V. These batteries will have a total capacity of 4.8kWh
48V - 100Ah - 4800 Wh - 4.8 kWh
How do I calculate my battery need?
To make your life easier, we have developed a tool to size your autonomous solar kit and the size of your battery fleet.
See you here!
• CABLES AND CONNECTORS
All cables and connection are pre-wired in our workshops. Our kits are very easily mounted by 'beginners' in electricity. For those who have some reservations about the technical side, our technical team assists you and helps you every day from 8am to 5pm.
• Mounting
The installation of this kit is very simple. Our instructions are clear and allow easy editing without any special knowledge. We answer all your questions before, during and after installing your system.
• Warranty
All products have an individual warranty.
Panels guaranteed 20 years at 80% of rated power.
Victron converter guaranteed 5 years.
Wind turbine guaranteed 5 years.

Solar panel
The panel selected as a base in this kit has been chosen according to our supplies.
You will find the characteristics of the latter by going to see its product sheet in the panel category.
Solar Regulator SRNE MPPT 12/24V 50A
Using PowerCatcher MPPT technology, the MC Series solar charging controller tracks maximum energy for solar panels.
This technology allows the controller to quickly and accurately track the maximum power point of a photovoltaic installation in any environment, to obtain the maximum production of a solar panel in real time and to greatly increase the energy efficiency of the solar system.
Characteristics
Articles | Parameter |
Model | MC2450N10 |
Tension of the system | 12/24V |
Zero load loss | 10mA |
Battery voltage | 9V-32V |
Maximum open-circuit PV voltage | 92V (25oC); 100V (Lowest ambient temperature) |
Maximum voltage range at power point | 50A |
Nominal charge current | 660W/12V 1320W/24V |
Maximum PV input power | |
Load conversion return | 99% |
Temperature compensation coefficient | -3mv/C/2V (defect); Lithium battery without temperature compensation |
Operating temperature | -35C / 60C |
IP rating | Ip32 |
Weight of the device | 900g |
How to communicate | Communication series TTL |
Altitude | |
Dimensions (mm) | 183*127*69.5 |

LCD display RM-6 For SRNE MPPT Controller
For real-time monitoring of the regulator's data and operating conditions.
Characteristics
Model | RM-6 |
Apply controller models | MC2420N10/MC2430N10/MC2440N10/MC2450N10 |
Entry tension | 5V-12V |
Consumption in sleep mode | 0.03W |
Energy consumption in operation | 0.04W |
Fixed bauds flow | 9600bps |
How to communicate | Ttl |
Interface type | PH2.0 |
Length of connection cable | 1.5M |
Operating temperature | -35C / 65C |
IP index | Ip32 |
Weight of the device | 90g |
Altitude | 3000M |
Size | 104.5X55.5X11.8 mm |
Victron MultiPlus 12V / 24V / 48V - 500VA To 1200VA
Victron Energy's Phoenix Multiplus combines a converter with a very high sinusoidal output voltage into one device, a full-fledged battery charger with full power output and a 4A output for the start battery.
Characteristics
Multiplus | C120/800 35 C24/800/16 C48/800/9 |
Converter |
Entry voltage range (VCC) | 9.5 - 17V 19-33V 38-66V |
Output | Output voltage: 230VCA - 2% |
Converter output power at 25oC (VA) (3) | 800 |
Continuous output power at 25oC (W) | 700 |
Continuous output power at 40oC (W) | 650 |
Continuous output power at 65oC (W) | 400 |
Peak Power (W) | 1600 |
Maximum efficiency (%) | 92/93/94% |
Empty consumption | 7/7/8W |
Empty consumption in vacuum modeSer | 2/2/3W |
Charger |
CA Entry | Power voltage range: 187-265 VCA Entry frequency: 45 -65 HZ Power factor:1 |
"Absorption" charge voltage (V CC) | 14,4/28,8/57,6 |
Float charge voltage (VCC) | 13,8/27,6/55,2 |
Storage mode (VCC) | 13,2/26,4/52,8 |
Service battery charge current (A) | 16/35/9A |
Start battery charge current (A) | 4 (only 12 and 24V models) |
Battery temperature sensor | Yes |
Battery Lithium SolarFam 12.8V 200Ah
Longer lifespan
Super-secure Lihtium Technology (LifePO4)
Standard size design
Lightweight
Greater useful capacity
Wider operating temperature
Low self-discharge
Bluetooth monitoring monitoring
BMS protection
Characteristics
Cycles | 3000 |
Voltage | 12.8V |
Technology | Lithium |
Battery capacity | 200Ah |
Weight | 28.8 kg |
Width | 390 mm |
Height | 260 mm |
Thickness | 232 mm |
Current charge | 40 A |
Max. current charge | 100 A |