View full size 
Victron Cyrix Battery Combiner - 120A / 230A / 400A
More info
" Cyrix Battery Combiner "
Smart battery management
This Victron battery Combiner is equipped with a microprocessor which is used to connect automatically the batteries in parallel when a battery is being charged. The disconnect happens automatically when battery is in "discharge" mode, ie when the voltage is below FLOAT level.
Automatic detection 12/24V and 24/48V
LED indicator - for model 12/24 230 only
The 12/24 230 Cyrixis equipped with a LED light indicating the sytem status (connection, disconnection, overheating,...)
Prevents voltage drops
Thanks to management by microprocessor, the combiner prevents voltage drops and thus the correction of charging voltages of battery chargers and alternators. It perfectly replace the diode isolators.
Cyrix 120, 230 and 400 - Technical characteristics
Victron Cyrix | Cyrix-ct 12/24-120 | Cyrix-ct 12/24-230 | Cyrix-ct 24/48-400 |
LED status indication | NO | YES | YES |
Continuous current | 120 A | 230 A | 400 A |
Cranking rating (5 seconds) | 180 A | 500 A | See table in the datasheet |
Connect voltage | From 13V to 13,8V and 26 to 27,6V | See table in the datasheet | |
Disconnect voltage | From 11V to 12,8V and 22 to 25,7V | See table in the datasheet | |
Current consumption when open | < 4 mA | 4 mA | |
Current consumption when closed | 12 V : 220 mA 24 V : 120 mA | 12 V : 320 mA 24 V : 180 mA |
|
StartAssist | YES | YES | YES |
Control cable included (length 1 m) | NO | YES | YES |
Protection category | IP54 | IP54 | IP54 |
Weight kg | 0,11 kg | 0,27 kg | 0,9 kg |
Dimensions h x w x d in mm | 46 x 46 x 80 mm | 65 x 100 x 50 mm | 78 x 102 x 110 mm |
Victron Cyrix 12/24 - 120 connexion diagram
