View full size 
Victron EasyPlus C 12/1600/70
More info
" EasyPlus C 12/1600/70 : Multi-functional power solution "
The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures
Technical information
- 12 Volt 1600VA sine wave inverter (3000 Watt peak power)
- 70A charger incl. 4A trickle charge for start battery
- Unique PowerAssist® technology protects the shore or generator from being
overloaded by adding extra inverter power when needed - 4 stage adaptive charge technology for quick and accurate battery charging
- The AC distribution consists of a RCD (30mA/16A) and four AC outputs protected by two 10A and two 16A circuit breakers
- One 16A output is controlled by the AC input: it will switch on only when AC is available. RCD (30mA/16A) on AC output
- No-break system: uninterrupted switching between shore/generator and inverter
- Battery cables included
Optimum comfort and safety
The EasyPlus guarantees uninterrupted power supply, whenever and wherever you are. Where shore or generator power is limited, the unique PowerAssist® technology makes it possible to boost the total capacity by adding extra energy from the batteries. Optimum safety is guaranteed with the integrated RCD (Residual Current Device) protecting against earth leakage.
Dimensions :
Height : 510mm
Width : 214mm
Depth : 110mm
Weight :11,7kg
Typical installation and Wiring Diagram
5 step installation: quick and easy
The EasyPlus gets its name from the simplicity of installation and use. The system can be installed within five simple steps making significant savings in time as well as space. The Easy Plus provides plugs and sockets for all AC connections and is supplied with the battery cables already fitted so you can save hours in installation time.
Step 1.
Select a suitable place for the EasyPlus (as close as possible to the batteries) and install the wall mounting bracket. Attach the Easy Plus to the bracket and secure it with the screws provided.
Step 2.
Connect the shore/generator input power and the outgoing circuits (including dedicated water heater feed) to the Easy Plus.
Step 3.
Connect the control panel (optional) with the UTP patch lead.
Step 4.
Connect the battery cables and temperature sensor to the batteries (also supplied as standard).
Step 5.
Switch on the RCD, the AC distribution and the inverter charger and the system is ready to use.
Data sheets and documentation
Specifications
| 70A | |
| 12V | |
| 1600 AV |
