More info
" The Victron BatteryProtect : disconnects the battery from non essential loads "
The Victron Energy BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Description
12/24V auto ranging
The BatteryProtect automatically detects system voltage
Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.
A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.
Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
Over voltage protection
To prevent damage to your sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.
Ignition proof
No relays but MOSFET switches, and therefore no sparks.
Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 15 seconds. Starting the engine will therefore not activate the alarm. The alarm output is an open collector output to the negative (minus) rail, max. current 500 mA. The alarm is typically used to activate a buzzer and / or lamp.
Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
Technical Features
| Battery Protect | BP-65 | BP-100 | BP-220 |
| Maximum continuous load current | 65 A | 100 A | 220 A |
| Peak current | 300 A | 600 A | 600 A |
| Operating voltage range | 6 - 35 A | ||
| Current consumption | Si allumé: 1,5mA Si éteint ou si arrêt en cas de tension faible: 0,6 mA | ||
Alarm output delay | 12 secondes | ||
| Maximum load on alarm output | 50 mA (protection contre le court-circuit) | ||
| Load disconnect delay | 90 seconds (immediate if triggered by the VE.Bus BMS) | ||
| Load reconnect delay | 30 secondes | ||
Default thresholds | Disengage: 10,5V or 21V Engage: 12V or 24V | ||
| Operating temperature range | Full load:-40°Cto +40°C (up to 60% of nominal load at 50°C) | ||
| Poids | 0,2 kg | 0,5 kg | 0,8 kg |
| Dimensions (H x L x P) | 40 x 48 x 106 mm | 59 x 42 x 115 mm | 62 x 123 x 120 mm |
Optional
All the range Victron BatteryProtect is available in option above
BP-65, BP-100, BP-220
(Datasheet on download)
Data sheets and documentation
- Number of Reviews : 4
- Average Grade : 4.8 /5
- A. Anonymous
- the 21/11/2021
5/5
- A. Anonymous
- the 29/04/2019
- 5/5
- A. Anonymous
- the 17/10/2014
- 5/5
- A. Anonymous
- the 17/10/2014
4/5
