
Battery with integrated charger Victron 12.8 V - 20 to 40 A
More info
The Peak Power Pack is a complete substitute for lead-acid batteries in applications where high currents occur over short periods of time. Designed primarily for caravan towing vehicles, it is equipped with an integrated charger allowing charging from the car's electrical system during the caravan journey. In this way, the pack will be fully loaded upon arrival at the campsite. If necessary, it is possible to carry out the charge thanks to the adapter provided to connect to the network. Charging is also possible from a solar panel.
Lightweight and easy to install
Ideal device for mobile applications
Fully protected from misuse
Excellent efficiency for solar or other applications, where deep discharges and insufficient refills can quickly damage lead-acid batteries.
Output 1: High current output for motorized manoeuvring assistance systems and high power applications
- Application for motorized caravan manoeuvring system: automatic stop of the high power output, 30 minutes after activation.
- Other applications: the high power output can be switched to "always on" mode.
- Resists short circuits Protection against excessive battery discharge
Output 2: Auxiliary output for low DC loads (not available on the 8Ah model).
-Always on
-Resists short circuits
-Protection against excessive battery discharge
Input 1: Solar charger/multifunction vehicle battery input
Voltage and current set to safely charge the lithium-ion battery. Almost any source of electrical power can be connected to this input, as long as it is between 11V < Wine
Input 2: Second input for connecting a power supply
A 3A power supply is included (connect to the 100/240 VAC mains).
Fast charging possible through input 1 (high current output).
A battery charger or converter/charger can be connected to a high power output to achieve fast charging. Maximum charging current of 40A, and maximum charging voltage of 14V.
Storage mode
Reduces the current absorbed from the battery to almost zero. This function prevents damage to the battery against excessive discharge during long storage periods.
Technical characteristics
Peak Power Pack | PPP-20 | PPP-30 | PPP-40 |
Capacity | 20 Ah | 30 Ah | 40 Ah |
Stored energy | 256 Wh | 384 Wh | 512 Wh |
Battery type | Lithium-ion (LiFePO4) | ||
Rated voltage | 12.8 V | ||
Autod offload if enabled | < 13 Ah/year (< 1.4 mA) | ||
Self-unloading in storage mode | < 6.5 Ah/year (< 0.7 mA) | ||
Output 1: high capacity "motorized displacement system" | |||
DC output current | 150 A | ||
Maximum output current (10 s) | 200 A | ||
Short circuit current | 300 A | ||
Security features | Overload / short circuit / temperature / excessive discharge | ||
Maximum charging current | n.a. | 15 A (unprotected) | 20 A (unprotected) |
Recommended charging voltage: | 14 V (unprotected) | ||
Maximum charging voltage | 14.2 V (unprotected) | ||
Maximum cable diameter | 16 mm² (screw terminals) | ||
Output 2: power network on board "domestic": | |||
DC output current | 30 A | ||
Maximum output current (10 s) | 50 A | ||
Short circuit current | 80A | ||
Security features | Overload / short circuit / temperature / excessive discharge | ||
Maximum charging current | n.a. | 10 A (unprotected) | 10 A (unprotected) |
Recommended charging voltage: | 14 V (unprotected) | ||
Maximum charging voltage | 14.2 V (unprotected) | ||
Maximum cable diameter | 6 mm² (screw terminals) | ||
Entrance 1: "car/solar" | |||
Supply voltage range | 11 V < Wine < 25 V | ||
Current limit | 7 A | ||
Input 2: "adapter" | |||
Output voltage | 15 V | ||
Output current | 3 A | ||
Input voltage | 110 / 230 V 50 / 60 Hz | ||
General | |||
Operation | Multifunction push button with two-color LED light | ||
EV port. Direct | Communication with a Smartphone (ELECTRONIC KEY VE. Direct–Bluetooth Smart required) Connection to a PC (EV cable. Direct–USB required) | ||
Operating temperature | Battery charge: 0°C to 40°C Battery discharge: -20°C to +40°C Storage: -20°C to +40°C (charging/discharging prohibited if outside the specified temperature range) | ||
Humidity (non-condensing) | Max. 95% | ||
Weight | 3.8 kg | 5.4 kg | 8.6 kg |
Dimensions (h x w x d) | 132 x 190 x 172 mm | 172 x 190 x 172 mm | 212 x 190 x 172 mm |
Standards | |||
Security | NEN-EN-IEC 60335-1, NEN-EN-IEC 60335-2-29, NEN-EN-IEC 62109-1 | ||
Emission/Immunity | NEN-EN 55014-1, NEN-EN 55014-2, NEN-IEC 61000-3-2, NEN-IEC 61000-3-3, NEN-EN 50498 |