More info
The inverter generation
Enjoy a continuous supply and reliable qEU network is available or not. The energy produced by the inverters WKS is oriented and used intelligently for optimal performance. All priorities can be defined by the user: use of batteries, solar or the AC source (generator or network) Consumption, energy produced by your panels is in flux and is not for consumption. The WKS UPS stores part of the solar production in batteries for later use during the evening or night. In remote areas, the WKS inverter can be connected to a generator to ensure the charge of the batteries if they are empty and the insufficient solar production. This inverter is able to work with several different energy sources such as:
- public network
- photovoltaic panels
- thermal generator
- batteries
Management by microprocessor directs energy based on production, consumption needs and the State of charge of the batteries. It is possible to carry out a follow-up in real-time locally or remotely. Inverter WKS feeding power into the grid.
3 operating modes
- Solar priority
- Relief
- Solar and network
Power multi-energy
Example: for an 1kW consumption need, you can have a configuration:
- 0.5 kW provided by solar energy
- 0.5 kW provided by batteries
This technique of multi power allows to strongly decrease the Battery Park and extend its life.
This inverter accepts up to 750 Wc of photovoltaic panels, and can connect to the network or another source of renewable energy if the solar production is insufficient.
Applications:
- Residential, commercial and telecommunications
- Areas where electricity supply is unstable
- Areas that are not connected to the network
Use back-up mode
It is possible to use the ups as a "back-up", without solar panels. In this mode, the UPS will ensure the role of UPS to protect your devices from the network cuts.
The UPS protects computers and equipment audio-visual or any other sensitive charge by providing a stable current. It guarantees a power supply of consumers.
The electricity produced from these inverter pure sine is stable.
Possibility to protect one or more rooms in your home through the distribution box.
Use in Off-grid mode (off-grid
In this configuration, the inverter uses panels to supply consumers and to charge the batteries when the Sun is present. The inverter draws aware of batteries to ensure the distribution of energy at night.
There is possibility to add a generator on the inverter AC input to ensure a backup power supply.
Use in mode hybrid
The inverter takes power on the network only if the batteries are empty and that the solar production was not sufficient to cover the consumption.
The inverter feeding power into the grid.
As for the "back-up" mode, it is possible to connect as a part of your installation domestic on the inverter. Consumers connected to the inverter will be always powered even if the grid power d e distribution. In addition, these consumers will be powered for free!
The models WKS 4.0 and 5.0 (with a respective capacity of 4 and 5 kVA) can connect in parallel so as to add their power. You can connect up to 4 devices in parallel to achieve a power of 20 kVA.
Converter Pure sine
The WKS is an inverter pure sine voltage (pure sine wave) that reproduces a stream of similar quality to that of the public network. It can be used to power any device.
MPPT regulator
The WKS has also the MPPT (Maximum Power Point Tracking) technology is to say he's looking at all times the maximum power point, which allows to get the best performance of the photovoltaic panels. In addition to providing increased energy to a facility, it optimizes the battery and prolongs their life. He scans the on-board tension to find the point of maximum power output and is capable of adapting the power provided by the Panel to align the voltage that the battery can receive.
Incompatible with the remote display.
Data Sheet
| POWER | 1000VA / 800W |
| AC INPUT | |
| Voltage | 120 or 230 VAC |
| Voltage range | 90-140 or 170-280 VAC (> computer) 65-140 or 90-280 VAC (> residential) |
| Frequency | 50 Hz / 60 Hz |
| AC OUTPUT | |
| Regulation of the voltage AC (Batt. Mode) | 110 / 120 VAC ±5% or 230 VAC ±5% |
| Peak power (5 sec) | 2000 WILL |
| Performance | 93% |
| Transfer time | 10 ms (for computers); 20 ms (for residential applications) |
| output | Pure sine |
| BATTERY AND AC CHARGER | |
| Voltage nominal battery | 24 VDC |
| Types of batteries | AGM, GEL, open (configurable) |
| Algorithm of load | 3 steps |
| Voltage in floating | 27 VDC (configurable) |
| Overload protection | 31 VDC |
| Maximum charge current | 20A |
| SOLAR CHARGER | |
| Power max PV | 600 W |
| MPPT operating range | 30 ~ 66 VDC |
| Maximum PV open circuit voltage | 75 VDC |
| Load current max | 25A |
| Max performance | 98% |
| Consumption standby | 2 W |
| PHYSICS | |
| Dimension D x W x H (mm) | 100 x 272 x 355 |
| Weight (kgs) | 6.8 |
| ENVIRONMENT | |
| Moisture | 5% to 95% |
| Operating temperature | -10 ° C - 50 ° C |
| Storage temperature | -15 ° C - 60 ° C |
Software
Data sheets and documentation
- Number of Reviews : 6
- Average Grade : 3.8 /5
- V. Antoine
- the 30/03/2023
1/5
- A. Anonymous
- the 18/06/2020
3/5
- A. Anonymous
- the 25/03/2018
5/5
- A. Anonymous
- the 17/02/2016
- 5/5
- A. Anonymous
- the 19/01/2016
- 5/5
- A. Anonymous
- the 15/11/2015
4/5
Specifications
| 24V | |
| 1000 VA | |
| Monophasé | |
| 1000VA |
