SMA Sunny Boy 4.0 SB4.0-1 AV-41 single-phase inverter
More info
ABSOLUTE COMFORT WITH SUNNY BOY 4.0
The new Sunny Boy 3.0–6.0 guarantees maximum energy production for households.
The new Sunny Boy 3.0–5.0, successor to the Sunny Boy 3000–5000TL successfully used worldwide, is much more than a photovoltaic inverter:
The Sunny Boy 3.0–5.0 is ideal for solar energy production for single-family homes.
Quick and easy installation
With its low weight, the Sunny Boy is quick to install and compact.
Quick assembly by one person thanks to the low weight of 17.5 kg
Minimal footprint thanks to its compact design
Quick assembly thanks to external connections
Intelligent optimization of energy production
Proven functionalities and integrated software solutions ensure that energy production is optimised throughout the lifetime of the installations. Even in case of shading. SMA ShadeFix is a patented software integrated into inverters to optimize energy production in almost any situation. In case of larger shading or complex roofs, the TS4-R optimizers, whose installation is simple and selective, make it possible to obtain an optimal production.
SMA ShadeFix is an integrated software to optimize energy production
Dynamic limitation of active power: direct use of excess energy, less energy taken from the grid
Integrated TS4-R communication for selective production optimization of heavily shaded panels
Expansion possible at any time
With the Sunny Boy, owners of photovoltaic systems always benefit from maximum production of their photovoltaic system. Should the use of solar electricity in the home increase, installations with the Sunny Boy can be equipped with intelligent energy management and SMA storage solutions at any time.
Characteristics
| Sunny Boy 3.0 | Sunny Boy 3.6 | Sunny Boy 4.0 | Sunny Boy 5.0 | Sunny boy 6.0 | |
| Input (DC) | |||||
| Max DC power (when cos φ =1) | 5500 W | 5500 W | 7500 W | 7500 W | 9000W |
| Max input voltage | 600 V | ||||
| MPP voltage range | 110 V to 500 V | 130 V to 500 V | 140 V to 500 V | 210 V to 500 V | 175V to 500V |
| Rated input voltage | 365 V | ||||
| Min. input voltage / starting input voltage | 100 V / 125 V | ||||
| Max. input current input A / input B | 15 A / 15 A | ||||
| Max. input current per string input A / input B | 15 A / 15 A | ||||
| Number of independent MPP entries / strings per MPP entry | 2 / A:2; B:2 | ||||
| Output (AC) | |||||
| Rated power (for 230 V, 50 Hz) | 3,000 W | 3,680 W | 4,000 W | 5,000 W | 6000W |
| Apparent power AC max. | 3,000 VA | 3,680 VA | 4,000 VA | 5,000 VA** | 6000VA |
| AC rated voltage/range | 220 V, 230 V, 240 V / 180 V to 280 V | ||||
| AC network frequency / range | 50 Hz, 60 Hz / −5 Hz to +5 Hz | ||||
| Rated network frequency / rated network voltage | 50 Hz / 230 V | ||||
| Max output current | 16 A | 16 A | 22 A*** | 22 A*** | 26,1 |
| Power factor for rated power | 1 | ||||
| Adjustable phase shift factor | 0.8 inductive to 0.8 capacitive | ||||
| Injection phases / connection phases | 1/1 | ||||
| Yield | |||||
| Max. yield / European yield | 97,0 % / 96,4 % | 97,0 % / 96,5 % | 97,0 % / 96,5 % | 97,0 % / 96,5 % | 97,0%/96,6% |
| Protective devices | |||||
| DC side disconnection device | ● | ||||
| Ground fault monitoring / network monitoring | ● / ● | ||||
| DC reverse polarity protection / AC short circuit resistance / galvanic separation | ● / ● / - | ||||
| Fault current monitoring unit, sensitive to all currents | ● | ||||
| Protection class (according to IEC 62103) / overvoltage category (according to IEC 60664-1) | I / III | ||||
| General characteristics | |||||
| Dimensions (W/H/D) | 435 mm / 470 mm / 176 mm (17.1 inches / 18.5 inches / 6.9 inches) | ||||
| Weight | 17 kg (38.5lb) | ||||
| Operating temperature range | −25 °C to +60 °C (−13°F to +140 °F) | ||||
| Noise emission, typical | 25 dB(A) | ||||
| Self-consumption (night) | 5.0 W | ||||
| Topology | Without transformer | ||||
| Cooling system | Convection | ||||
| Protection class (according to IEC 60529) | IP65 | ||||
| Climate class (according to IEC 60721-3-4) | 4K4H | ||||
| Maximum permissible value of relative humidity of air (non-condensing) | 100,00% | ||||
| Equipment | |||||
| DC connection / AC connection | SUNCLIX / AC plug | ||||
| Shading management: SMA Shadefix (integrated) / TS4-R | ● / ○ | ||||
| Warranty: 5 / 10 years | ● / ○/ ○ | ||||
| Certifications and approvals (other on request) | AS 4777, C10/11, CE, CEI 0-21, EN 50438, G59/3, G83/2, DIN EN 62109 / IEC 62109, NEN-EN50438, VDE-AR-N 4105, VDE0126-1-1 | ||||
| Certifications and approvals (planned) | AS 4777.2, C10/11, CE, IEC 0-21, EN 50438, G59/3-4, G83/2-1, DIN EN 62109 / IEC 62109, NEN-EN50438, IE-EN50438, NT_Ley20.571, ÖVE/ÖNORM E 8001-4-712 & TOR D4, PPDS, PPC, RD1699, TR3.2.1, UTE C15-712, VDE-AR-N 4105, VDE0126-1-1, VFR 2014, RfG compliant | ||||
| Certifications and approvals (planned) | DEWA, IEC 61727, IEC 62116, MEA, NBR16149, PEA, SI4777, TR3.2.2 | ||||
| ● Standard equipment ○ Optional equipment — Not available Data in nominal conditions Version: 11/2019 1) 4,825 W for VDE-AR-N 4105 2) 4,600 W / 4,600 VA for VDE-AR-N 4105 3) AS 4777: 21.7 A | |||||
| Type designation | SB3.0-1AV-41 | SB3.6-1AV-41 | SB4.0-1AV-41 | SB5.0-1AV-41 | SB6.0-1AV-41 |
Data sheets and documentation
Specifications
| Monophasé | |
| 2 MPPT | |
| 4000VA |
