More info
Enphase IQ 7+ and IQ 7A micro-inverters
The enphase Enphase IQ 7+ ™ and Enphase IQ 7A™high-efficiency microinverters are ready for Smart Grids.
Part of the Enphase IQ system, the IQ 7+ and IQ 7A integrate seamlessly with the Envoy-S™ and Enphase Enlighten™ monitoring and analysis software.
The IQ 7+ and IQ7A microinverters exceed the reliability and robustness standards set by previous generations of microinverters and undergo more than one million hours of load testing, allowing Enphase to offer an unparalleled warranty.
Easy to install
- Lightweight and simple
- Faster installation with improved and lightweight two-conductor cabling
Productive and reliable
- Optimized for all high-power modules
- More than one million hours of cumulative testing
- Class II double insulation envelope
Ready for Smart Grids
- Complies with complex network requirements, in terms of voltage management and decoupling frequency
- Remote updates to respond to changing network constraints
- Configurable for different network profiles
IQ7+/7A Phase Micro inverter
The Enphase IQ 7+ ™ and Enphase IQ 7A™high-efficiency microinverters are ready for Smarts Grids.
Ready for Smart Grids - The Enphase IQ 7 range of micro-inverters, seventh generation platform is ready for smart grids. It achieves the highest efficiencies among existing module-level power electronics (MLPE) solutions. Its polymer housing and revolutionary wiring system simplify installation.
- Optimized for high-power modules of 60 cells / 120 half cells, 72 cells / 144 half* cells and 96** cells
- More than one million hours of cumulative testing
- Class II double insulation
- Complies with network requirements in terms of voltage, frequencies, reactive power, power limitation ... etc.
- Remote updates of network profiles according to their evolution
- Configurable for a very wide number of network profiles
*The IQ 7+ micro-inverter is suitable for 72-cell 144-cell modules.
** The IQ 7X microinverter is suitable for 96 cell modules.
IQ 7A Phase Micro inverter
The seventh generation Enphase microinverters are powered by our unique software-defined architecture, delivering an efficient design with a single hardware reference worldwide.
The new IQ 7A completes the family with support for modules up to 450W, targeting high-power residential and commercial solar applications.
Like all Enphase IQ microinverters, the IQ 7A microinverter is powered by Enphase's unique software-defined architecture.
- Optimized for high-power 60-cell/120-half-cell and 72-cell/144-cell modules
- Maximum output power: 366 VA @ 230 VAC
- Recommended PV module input power: 295-450+ W
- Power point search range (Operating range): 18 V-58 V
- EU efficiency of 96.5%
The Enphase range of micro-inverters
A solution for any type of installation
| Enphase IQ 7+ | IQ 7A phase |
| Main use Residential / tertiary | Main use Residential / tertiary |
| Project voltage 230/400V | Project voltage 230/400V |
| Rated output power 290 VA | Rated output power 349 VA |
| Module compatibility 60-cell modules 120 half-cells and 72 cells 144 half cells | Module compatibility 60-cell modules 120 half-cells and 72 cells 144 half cells |
Application Web Enphase MyEnlighten
For Owners of an Enphase System
With the Enphase MyEnlighten web app, you can track your energy production, monitor the proper functioning of your system and share your data with family and friends, all from a simple and user-friendly interface.
Enphase Enlighten mobile app
For system owners
With the Enphase Enlighten mobile app, you can check the status of your system in the blink of an eye without going into detail, while monitoring the health and performance of your system, production by panel no matter where you are. You can see global energy and energy production data per panel with a single click, as well as overviews of your energy consumption and storage (if applicable).
Get it from the App Store or Google Play Store.
Characteristics
| INPUT DATA (CD) | Enphase IQ 7+ | IQ 7A phase |
| Recommended Module Power (STC) | 235 W – 440 W + | 295 W – 460 W + |
| Module compatibility | 60 & 72 cells | 60, 66 & 72 cells |
| Max DC input voltage | 60 V | 58 V |
| Operating voltage range | 16 V – 60 V | 18 V – 58 V |
| Starting voltage min/max. | 22 V / 60 V | 33 V / 58 V |
| DC max short circuit current | 15 A | |
| Surge class DC port | II | |
| DC port replenishment with a single failure | 0 A | |
| PV network configuration | AC side protection requiring max 20A per bypass circuit | |
| OUTPUT DATA (AC) | ||
| Max output power | 295 VA | 366 VA |
| Max nominal output power. | 290 VA | 349 VA |
| Rated voltage/voltage range (L-N) | 230 V / 184-276 V | 230 V / 219-264 V |
| Maximum output current | 1.26 A | 1.52 A |
| Rated frequency | 50 Hz | |
| Frequency range | 45 – 55 Hz | |
| Maximum number of units per branch of 20A | 12 (Ph + N), 36 (3Ph + N) | 10 (Ph + N), 30 (3Ph + N) |
| Maximum number of units per cable | 12 (Ph + N), 21 (3Ph + N) | 10 (Ph + N), 18 (3Ph + N) |
| Surge protection class | III | |
| AC port power supply current | 0 A | |
| Fixed power factor | 1 | |
| Power factor (adjustable) | 0.7 inductive to 0.7 capacitive | |
| YIELD | @230 V | |
| Yield EN 50530 (EU) | 96,50% | |
| MECHANICAL DATA | ||
| Operating ambient temperature range | -40°C to +65°C | |
| Permissible range of relative humidity of the air | 4% to 100% (condensation) | |
| DC connector type | Type MC4 | |
| Dimensions (L x W x D) | 212 x 175 x 30.2 mm (without support) | |
| Weight | 1.08 kg | |
| Cooling | Natural convection – no fan | |
| Use in wetlands | Yes | |
| Degree of pollution | 3 | |
| Envelope | Class II double insulation, corrosion-resistant polymer housing | |
| IP protection rating | Exterior – IP67 | |
| FEATURES | ||
| Communication with Enjoy-s | PLC (in-line carrier current) | |
| Monitoring | Enlighten Manager and MyEnlighten monitoring options compatible with Enpase Envoy-S | |
| Compliance | AS4777,2, RCM, IEC/EN61000-6-3, IEC/EN62109-1, IEC/EN62109-2 | |
| Guarantee | 25 years | |
Data sheets and documentation
- Number of Reviews : 11
- Average Grade : 4.6 /5
- D. Pestiaux
- the 20/11/2022
5/5
- R. Olivier
- the 02/11/2022
2/5
- K. Molnar
- the 11/08/2022
- 5/5
- R. Jean Francois
- the 20/04/2022
- 5/5
- A. Anonymous
- the 25/09/2021
4/5
- A. Anonymous
- the 17/05/2021
- 4/5
- A. Anonymous
- the 16/04/2021
- 5/5
- A. Anonymous
- the 10/02/2021
- 5/5
- A. Anonymous
- the 28/01/2021
- 5/5
- A. Anonymous
- the 05/12/2020
- 5/5
- A. Anonymous
- the 07/05/2020
- 5/5
Specifications
| Monophasé | |
| 1 MPPT | |
| - de 1000VA |
