Differential circuit breaker 63A - 300mA Type B

Tongou

More info

Differential circuit breaker 63A - 300mA Type B

With the diversification of energy and equipment use, the interactive use of alternating current and direct current and products with many different waveform signals, we need higher level residual current protection circuit breakers to protect our personal safety and avoid the danger of electric shock.


Type B RCD RCCB General:

Type B RCD differential circuit breakers, in addition to normal alternating current, can detect high frequency AC and pure DC ground leakage currents.
The reduction of the risk of fire and/or electrocution through the automatic disconnection of the power supply is based on the selection of the right type of RCCB.
The RCCB provides mutual protection to the operator's body under conditions such that exposed live parts must be connected to a suitable grounding pole. The RCCB also provides protection against the fire hazard caused by the ground fault current due to a failure in the operation of the overcurrent protection device.


Advice:

  1. RCCB with rated sensitivity up to 10mA could be used as an additional protective device in the situation where the protective device fails.
  2. RCCB designed for home installation and other similar applications, is usually used for non-professional operation (no maintenance is required).
  3. RCCB provides protection against electric shock resulting from direct contact of the two protected lines, or the leakage current between these two lines.
  4. It is recommended to install special devices such as surge protection devices, lightning arrester, etc. on the upstream line to the RCCB as a precaution against the potential surge voltage and current that occurs at its power input.

Characteristics

 

ModelElectromagnetic type
Residual current characteristic:Type B
Pole Number:2P
Nominal manufacturing and cut-off capacity630A
Rated current(A)16-63A
Rated voltage230V / 400V
Rated frequency50 / 60Hz
Nominal residual operating current |△(A):0.03, 0.1, 0.3
Nominal residual current of non-operation |△ no:0.5|△n
Nominal conditional short circuit current inc:6kA
Conditional residual short circuit current assigned |△c:6kA
Trigger time:Instant trigger ≤0.1s
Residual trigger current range:0.5|| △n~|△n
Electromechanical endurance≥5000 cycles
Connection capacity:Rigid conductor 25mm²;
Connection terminalscrew terminal
Column terminal with clamp
Tightening torque3.5 Nm
InstallationOn symmetrical DIN rail 35 mm
Panel mounting

Data sheets and documentation

Product Reviews
  • Number of Reviews : 1
  • Average Grade : 5 /5
  • A. Jean Francois
  •  the 08/02/2023
  • 5/5
Très bon produit

Specifications

Type de matériel électriqueDisjoncteur