Time relay 8A - Crouzet MUR3
Crouzet
More info
Crouzet MUR3 - Time relay 8 has
› Multifunction or monofonction
› Downtime (7 ranges switchable)
› Multivoltage
› Screw or spring terminals
› Visualization of States led 1 (relay version) › possibility to supply a load in parallel › possible order by sensor 3 son
Dimensions
Output 1 relay inverter
Features
| Specifications | |
| Functions | A Ac - At - B - Bw - C - D - Di - H - Ht |
| Time delay | 0,1s →100 h |
| Output | 1 relay inverter |
| Rated current | 8A |
| Connections | Screw terminals |
| Supply voltage | 12 →240 V∿/⎓ |
| Reference | 88827103 |
| Time delay | |
| Delay lines (7 lines) | 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h |
| Fidelity of repetition (at constant parameters) | ± 0.5% IEC / EN 61812-1 |
| Drift in temperature | ± 0.05% / ° C |
| Drift in tension | ± 0.2% / V |
| Accuracy of display according to IEC / EN 61812-1 | ± 10% / 25 ° C |
| Immunity to the popping time: typical | < 10 ms |
| Minimum length of the typical pulse (relay version) | 30 ms |
| Minimum length of the typical pulse (static version) | 50 ms |
| Minimum length of the typical pulse (with load relay version) | 100 ms |
| Time to maximum rearmament by typical power failure (relay version) | 120 ms |
| Time to maximum rearmament by cutting typical supply (static version) | 350 ms |
| Power | |
| Multivoltage supply voltage | According to version |
| Frequency (Hz) | 50/60 |
| Market factor | 100.00% |
| Range of use | 85% →110 85% a for 12 V ∿/⎓ →120 |
| Power consumption maximum | 32 GO (240 V∿) - 1.5 W (240 V⎓) - 0.6 W (24 V⎓) - 0.7 WILL (12 V∿) - 0.7 W (12 V⎓) |
| Output items | |
| Breaking capacity | 2000 / 80 W |
| Maximum breaking current | 8 A∿ 250 V∿ resistive - 8 A⎓ 30 V⎓ resistive |
| Minimum breaking current | 10 my / 5 V⎓ |
| Maximum cut-off voltage | 250 V∿ / 8 A∿ resistive 250 V⎓ / 0.3 A resistive |
| Life time electric (maneuvers) | 10⁵ 250 V∿ resistive 8A |
| Life mechanics (maneuvers) | 10 x 10⁶ |
| Dielectric strength according to IEC / EN 61812-1 | 2.5 kV / 1 min / 1 my / 50 Hz |
| Surge according to IEC / EN 60664-1, IEC / EN 61812-1 | 5 kV - wave 1.2/50 μs |
| General characteristics | |
| Compliance with standards | IEC / EN 61812-1, IEC / 61000-6-1, IEC / 61000-6-2, IEC / 61000-6-3, IEC / 61000-6-4 |
| Certifications | CE, UL, ass, CSA, GL |
| Temperature limits use (° C) | -20 → + 60 |
| Temperatures (° C) storage limit | -30 → + 60 |
| Installation category (according to IEC / EN 60664-1) | Category of overvoltage III |
| Creepage and distance in the air according to IEC / EN 60664-1 | 4 kV / 3 mm |
| Degree of protection (IEC / EN 60529) | IP20 |
| IP40 | |
| Degree of protection (IEC / EN 60529) front | IP50 |
| Held in vibration according to IEC / EN 60068-2-6 | 20 m/s² 10 Hz →150 Hz |
| Relative humidity according to IEC / EN 60068-2-30 without condensation | 93% without condensation |
| Electromagnetic compatibility - immunity to landfills TIC-ticks according to IEC / EN 61000-4-2 | Level III (Air 8 kV/6 kV contact) |
| Immunity to electromagnetic fields according to IEC / EN 61000-4-3 | Level I - (1 V/m: 2.0 G round ' 2.7 G Hz Hz) level II - (3 V/m: 1.4 G Hz →2, 0 G Hz) level III - (10 V/m: 80 M Hz →1 G Hz) |
| Immunity to rapid transient burst according to IEC / EN 61000-4-4 | Level III (live 2 kV/clamp coupling capacitive 1kV) |
| Immunity to surges on supply according to IEC / EN 61000-4-5 | Level III (mode common 2 kV / 1 kV differential mode) |
| Immunity to the frequency in common mode according to IEC / EN 61000-4-6 | Level III (effective 10V: 0.15 M to 80 M Hz Hz) |
| Immunity to the hollow and cuts voltage according to IEC / EN 61000-4-11 | 0% residual voltage, 1 cycle 70% residual voltage, 25-30 cycles |
| Conducted emissions sector and radiated according to EN 55022 (CISPR22), EN55011 (CISPR11) | Class B |
| Setting: symmetrical DIN rail | 35 mm |
| Ability of Muskie clamping without tip | 1 x 0.5 →3, 3 mm² - (AWG 20 →AWG 12) 2 x 0.5 →2, 5 mm² - (AWG 20 →AWG 14) |
| Capacity clamping multilegged with tip | 1 x 0.5 →2, 5 mm² - (AWG 20 →AWG 14) 2 x 0.5 →1, 5 mm² - (AWG 20 →AWG 16) |
| Case material | Self-extinguishing. |
| Test shock according to IEC / EN 60068-2-27 | 15 g - 11 ms |
| Short interruptions of voltage according to IEC / EN 61000-4-11 | 0% residual voltage, 250/300 cycles |
| Terminals with spring, 2 terminals by connecting point - flexible son | 2 x 0.5 →1, 5 mm² - (AWG 20 →AWG 16) |
| Terminals with spring, 2 terminals by connecting point - rigid son | 2 x 0.5 →1, 5 mm² - (AWG 20 →AWG 16) |
| Mass: 17.5 mm casing | 88827105 (MUR1): 63 g 88827115 (MAR1): 63 g 88827125 (MBR1): 63 g 88827135 (MCR1): 62 g 88827145 (MHR1): 63 g 88827150 (MLR4): 63 g 88827155 (MLR1): 64 g 88827100 (MUR4): 62 g 88827103 (MUR3): 66 g 88827503 (MURc3): 59 g |
| Insulation according to IEC / EN 60664-1 | 100 MΩ (500 V ⎓) |
| Output element | |
| Relay 1 or 2 inverters AgNi (without cadmium) | 1 C/O |
