View full size 
Victron SmartShunt Controller 500A/ 50mV
More info
The shunt for smart battery
The SmartShunt is an all-in-one, but screenless battery controller. Your phone serves as a screen. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet), and you can easily read all the battery settings that are under surveillance such as charge status, remaining battery life, historical information and much more.
Alternatively, the Smartshunt can also be connected and read by a GX device. The connection to the SmartShunt can be done using a VE cable. Direct.
The SmartShunt is a good alternative to the BMV battery controller, especially for systems where you want to supervise a battery, but with less cable and mess.
The SmartShunt is equipped with Bluetooth, an VE port. Direct and a connection that can be used to monitor a second battery, midpoint or temperature sensor.
Characteristics
| SmartShunt | 500A |
| Supply voltage range | 6.5 - 70 VDC |
| Power draw | < 1 mA |
| Input voltage range, Auxiliary battery | 6.5 - 70 VDC |
| Battery capacity (Ah) | 1 - 9999 Ah |
| Operating temperature range | -40 +50 ºC (-40 - 120 ºF) |
| Measures the voltage of one second battery, or temperature, or the midpoint | Yes |
| Temperature measurement range | -20 +50°C |
| VE communication port. Direct | Yes |
| RESOLUTION AND ACCURACY | |
| Current | ± 0.1 A |
| Tension | ± 0.01 V |
| Ampere-hours | ± 0.1 Ah |
| State of charge (0 – 100%). | ± 0.1% |
| Time to go | ± 1 min |
| Temperature (if the temp. optional is connected) | ± 1°C/°F (0 - 50°C or 30 - 120°F) |
| Current measurement accuracy | ± 0.4% |
| Offset | Less than 20/40/80 mA |
| Voltage measurement accuracy ± 0.3% | ± 0.3% |
| INSTALLATION and DIMENSIONS | |
| Dimensions (h x w x d) | 500 A: 46 x 120 x 54 mm |
| Degree of protection | IP21 |
| STANDARDS | |
| Security | EN 60335-1 |
| Emission/Immunity | EN-IEC 61000-6-1 – EN-IEC 61000-6-2 EN-IEC 61000-6-3 |
| Car | EN 50498 |
