View full size 
Sofar Solar single-phase hybrid inverter HYD3680-EP
More info
Sofar Solar single-phase hybrid inverter HYD3680-EP
Single-phase hybrid inverter - the perfect solution to enable energy storage in your PV plant with on- and off-grid functions.
The HYD 3000...6000-EP is the new multi-talented hybrid inverter for solar and storage applications. During network outages, it can deliver up to 5 kW of backup power supply (EPS) in 10ms thanks to its built-in EPS port. The integrated energy management system has several user-friendly modes, optimizing the user experience, including an automatic self-use mode. The user can also set different time and/or date ranges or rules for the day of the week. All modes can be easily configured on the large LCD screen.
A WiFi key comes with the inverter, to easily connect the inverter to the Sofar monitoring portal.
High efficiency
• Maximum efficiency of 99.9%.
• Accurate real-time MPPT algorithm for maximum exploitation
• Wide operating range of input voltage
Flexible configuration
The inverter works with lead (GEL) or lithium batteries.
Use in backup mode (back-up)
An inverter can be used in "back up" without the need for photovoltaic panels. In this mode, the UPS will assume the role of an inverter to protect your equipment from network interruptions. Therefore, an inverter protects computers and AV equipment or any other sensitive load by providing a constant flow of electrical current. It guarantees a power supply with a failover time of less than 10 ms thanks to the EPS function.
Use in stand-alone mode (off-grid)
In this configuration, the inverter combined with batteries uses the panels to power consumers and recharge the batteries when there is sun. The inverter draws current from the battery to provide nighttime power distribution.
Use in Hybrid mode
The inverter draws its energy from the grid only when the battery is depleted and solar energy does not produce enough to meet consumption.
All in one. Flexible and cost-effective system solution
• Choice of free space thanks to IP65
• Easy installation and maintenance thanks to the "Plug & Play" connection
• Interface selection - Wi-Fi / RS485 /GPRS
• LCD screen + LED
• Built-in zero export function
Low maintenance cost
• Detachable cover for easy installation
• Stainless aluminum covers
• A flexible control solution
Characteristics
| Battery settings | |
| Battery type | Lithium-ion, Lead-acid |
| Nominal battery voltage | 48 V |
| Battery voltage range | 42 – 58 V |
| Battery capacity | 50 – 2000 Ah |
| Maximum charge/discharge power | 4000 W |
| Max charging current | 80 A |
| Max discharge current | 80 A |
| Charge curve (lithium-ion) | BMS (Battery Management System) |
| Charge curve (lead-acid) | Adaptive 3-level maintenance |
| Depth of discharge | Lithium ion: 0 – 90% DOD adjustable, lead acid: 0 – 50% DOD adjustable (depth of charge) |
| DC input (PV side) | |
| Recommended maximum PV input power | 5400 Wp |
| Maximum DC power for a single MPPT | 3500 W |
| Maximum input voltage | 600 V |
| Starting voltage | 100 V |
| Nominal input voltage | 360 V |
| MPPT Operating Voltage Range | 90 – 550 V |
| MPPT voltage range at full power | 180 – 500 V |
| Number of MPP trackers | 2 |
| Maximum input current per MPPT | 13 / 13 A |
| Maximum input short circuit current per MPPT | 18 / 18 A |
| Output / AC Input (Network Side) | |
| AC power rating | 3680 W |
| Maximum AC power output to the power grid | 3680 VA |
| Maximum AC power of the power grid | 7360 VA |
| Max AC current output to the power grid | 16 A |
| Max AC current from the power grid | 32 A |
| Rated network voltage | L / N / PE, 230 Vac |
| Network voltage range | 180 Vac-276 Vac (according to local standard) |
| Nominal frequency | 50 Hz / 60 Hz |
| Output THDi (at rated output) | < 3% |
| Power factor | 1 default (+/-0.8 adjustable) |
| AC Output (Emergency Power) | |
| Maximum apparent power | 3680 VA |
| Peak output power, duration | 4400 VA, 60s |
| Maximum output current | 16 A |
| Nominal voltage, frequency | 220 V / 230 V, 50 / 60 Hz |
| THDv (symmetrical @Charge) | < 3% |
| Switching time | 10 ms default |
| Yield | |
| MPPT Efficiency | 99,90% |
| Maximum efficiency of the solar converter | 97,60% |
| European efficiency of the solar inverter | 97,20% |
| Maximum battery charging efficiency | 94,60% |
| Maximum battery discharge efficiency | 94,60% |
| Protection | |
| PV reverse polarity protection | Yes |
| PV insulation detection | Yes |
| Monitoring of soil defects | Yes |
| Overcurrent protection | Yes |
| Surge protection | Yes |
| DC switch | Optional |
| Firm frequency response function | Optional |
| Protection SDP | Varistor: Type III standard |
| General data | |
| Ambient temperature range | -30°C~+60°C (more than 45°C decommissioning) |
| Self-consumption in standby mode | < 10 W |
| Topology | High frequency sunstroke (for battery) |
| Degree of protection | IP65 |
| Permissible relative humidity range | 0~100% |
| Communication | RS485 / WiFi / Bluetooth / CAN2.0 / Ethernet |
| Protection class | Class I |
| Maximum operating altitude | 4000 m |
| Connecting the current sensor | External |
| Noise | <25 dB |
| Weight (kg) | 21.5 kg |
| Cooling | Natural |
| Size | 482 x 503 x 183 mm |
| Display | LCD, App via Bluetooth |
| Guarantee | 5 years |
| Certifications and standards | |
| EMC | EN 61000-6-2, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12 |
| Safety standards | IEC 62109-1/2, IEC62040-1, IEC 62116, IEC 61727, IEC 61683, IEC 60068 (1, 2, 14, 30) |
| Network Standards | VDE V 0124-100, V 0126-1-1, VDE-AR-N 4105, IEC 0-21, EN 50549, G83 / G59 / G98 / G99, UTE C15-712-1, UNE 206 007-1 |
Data sheets and documentation
Specifications
| 3680VA |
