View full size 
More info
Enphase relay Q (multiphase)
Enphase IQ facilities, the Relay Q multiphase works as a device monitoring and disconnection of the network.
The relay Q isolates physically the microonduleurs of the series IQ of the network when anomalies are detected or according to the regulations of the network, and it will automatically reconnect when valid network conditions are re-established.
The relay Q Tetrapolaire allows you to isolate all phase conductors and the neutral and works with the gateway Envoy-S.
Easy to install
- Light and simple
- Mounting on DIN rail for quick installation
Fiable
- Reliable load control
- auto reset when returning to normal network conditions
Smart
- Can be configured to monitor 1, 2 or 3 phases
- Update remotely possible
- Easy to understand by led indication
Technical characteristics
SPECIFICATIONS Q-RELAY-3 P-INT | Continuous protection of decoupling rcbo (50 Hz) with detection of component injection |
| Overvoltage category (EN 61010-1) | III |
| CAT III | GRID terminal is rated for measurement category III. |
| Pollution degree (EN 61010-1) | 2 |
| Operating voltage AC range | 85 to 265 Vrms |
| Nominal input voltage (vname) | 230 / 240 Vrms |
| Rated frequency | 50 Hz |
| Acquisition time of the values of frequency and voltage in normal operation | 100 ms (5 line cycles @ 50 Hz) |
| Number of entries protected voltage | Up to 3 |
| Number of microinverters IQ 7 by phase | Up to 19 IQ 7 Microinverters Enphase microinverters or 16 microinverters Enphase IQ 7 + |
| Number of relay Q per system | Limited to 20 relay active Q by system |
Electric output type | Tetrapolar relay normally open (L1, L2, L3 and N) |
| Output power | 6 kVA per phase |
| Electric output type | 230 / 240 Vrms, 25A |
| Power consumption at idle | 18 GO |
| LEDs | Four LEDs Red/Green: three for triggers in surge and soutension, one for triggering frequency (min f / f max) and component injection continues (DC) |
| Editing | 35 mm DIN rail (standard) rail |
| Width | 107 mm |
| Power surge - L1 output N | Combination (1kV 2Ω) |
| Operating temperature range | -40 ° C to 50 ° C |
| IP rating | IP 20 (to use in a protected environment) |
| Moisture | 0 to 95 without condensation |
| Compliance | IEC 61010, EN 61010-1 |
Compliance EMCI | IEC 61326, BS 50065-1 & 2-2, BS IN 61326 - 1 & 2, BS EN 61000-3-11 & 12 |
| Warranty | 5 years |
Product Reviews
- Number of Reviews : 2
- Average Grade : 5 /5
- A. Anonymous
- the 05/12/2020
5/5
Sans
- A. Anonymous
- the 06/03/2019
- 5/5
Rapport qualité prix ... impeccable
